To Order: kingsforge@gmail.com or call (706) 969-3027
Battle Ready Swords and Stage Combat Swords
The following pictures and works of our swords are completely hand forged and most are battle ready, read description for type of sword. Please be advised that swords even with a dull edge are capable of inflicting major damage and injury if used improperly. We recommend that if you intend on using your sword for battle that you take a course from a professional swordsmen to protect yourself and others that you engage swordplay with. Most of our swords are made for use but we hold no responsibility for misuse. Many of our Pirate mates love our swords as they are light to carry and fast in battle. Please read each listing and fit yourself to a sword. If we do not have what you are looking for in stock feel free to call us or send us a message. Most of our swords are made for battle but we do also make hip hangers that are strictly for show and display. Hip Hagers and display swords are just that, for display "not for battle" and they will be listed as such.
Yellow Bronze Dagger
Bronze has been used in weaponry since 3000 BC and as little as it has been used in more recent years I think its time for a bit of a comeback. This blade is cast as a single piece, yellow bronze dagger with a lot of Georgian Era influence but also has traits in the blade that date back much further making it a fully transitional piece. Made as a last resort weapon yet light enough to be worn it the hair at 2.4 oz. Its overall length is 8" 1/2 with a blade length of 4"1/2 inches. Stamped with our forge mark. Can be used as a Belt Dagger, Boot Dagger, Bodice Dagger or even a Garter Dagger with the proper sheath.Comes without sheath as a Hair Dagger but if you would like a sheath just let us know when ordering
Item # SFD Skull Faced Dagger 175.00
Item # PD Plain Dagger 165.00
CLICK ON EACH PICTURE TO ENLARGE
Yellow Bronze Companion Dagger
Made only as a last resort dagger this fine piece is cast of White Bronze and a piece I will continue to produce. In looking for a design that is as elegant as a piece of jewelry I came up with this fine casting. Made to be worn as a neck knife or Bodice Dagger it will hang from a simple sheath from the neck with a single lace of leather in a soft leather sheath with a cardboard core. This one sold before I was able to post it for a fine lass that wanted a small dagger. It is 9" overall, 2" 5/8 wide at the guard and 5/8 wide at the grip. This would also make a nice thigh dagger for the ladies, only 4.5 oz in weight.
Item # WBCD
175.00
Yellow Bronze Companion Dagger
CLICK ON EACH PICTURE TO ENLARGE
White Bronze Push Dagger
Today we don't often think of bronze and weaponry but it was very popular during the Bronze age. This dagger is no different than the quality of weapon of this size at that time. This Kings Forge Push Dagger will be a new staple of our website, cast in both White and Yellow Bronze. This one being in White Bronze. This dagger is 10" overall and can be worn as a Bodice dagger, boot dagger, belt dagger or even thigh dagger. We will make a sheath at an extra cost on this new model and to your desire of how you would like to wear it.
ITEM # WBPD
175.00
White Bronze Push Dagger
CLICK ON EACH PICTURE TO ENLARGE
Fire and Ice
Fire and Ice come to mind with the blazing handle and cold steel. The blade was forged from 1084 steel with a 14" blade that is 20" 1/2 long overall. Steel guard and pommel polished to a nice finish with a Fire red handle. Double threaded at the tang with a nit buried up against the handle and a threaded pommel. It comes with a black sheath made to be used as a right or left handed sheath. Even a fighting dagger should have class.
ITEM# FI
SOLD
395.00
CLICK ON EACH PICTURE TO ENLARGE
Tortoise Shell Damascus Knife
This fine knife is layered Damascus steel forged right here in our workshop. Made with a sharpened edge and comes complete with brown belt sheath and button snap. The knife measures just over 12" with a 8" blade. The scales are Kirinite tortoise shell pattern, a very durable product that will not warp or change in shape.
Item# TSDK
SOLD
Tortoise Shell Damascus Knife
CLICK ON EACH PICTURE TO ENLARGE
Bush Knife Machete
This is one big knife, more of a Cutlass profile in the blade with a machete feel to it. 25" 0ver all with a 5" handle and 20" sharpened blade. Fitted with Birdseye Maple scales and stained in Colonial Maple stain. Made to get out and do some work. Full leather belt sheath.
Item # BKM
325.00
Bush Knife Machete
SOLD
CLICK ON EACH PICTURE TO ENLARGE
Stage Combat or Dress Sword
Rarely do I make a stage combat or dress sword but here we have one. Made with a guard provided from a customer that wanted me to fit a blade of his to a different guard. Made with a 26" battle ready blade but with the fittings I used to assemble it it is only threaded by a single brass pommel nut and why I am selling this sword as a stage combat and dress sword only. It comes complete with scabbard and is 30" 1/2 overall.
Item # SCDS
375.00
Stage Combat or Dress Sword
CLICK ON EACH PICTURE TO ENLARGE
Wide Shell Guard Cutlass
Made in the style of a Jody Sampson guarded sword this weapon is made for battle. The guard gives more than adequate protection of the hand in battle.The blade on this sword is 29" and it has an overall length of 36". This sword is battle ready with an un-sharpened blade. Complete with all black scabbard, wood core covered with black leather.
Item# WSGC
495.00
Wide Shell Guard Cutlass
CLICK ON EACH PICTURE TO ENLARGE
American Hunting Sword
Made in the style of John Bailey circa 1770 -1775. Made with fullered blade of 23" 1/4 with overall length of 29". Accents are cast of brass and it is double threaded at the tang. A distinct Lions head pommel adorns the end of this fine sword as was common with Bailey's work. The handle is carved antler dyed and inlaid with sterling silver flat wire. This fine sword comes with a black scabbard with brass fittings. One of the lightest swords I have made in this style weighing in at only 1 pound 9 oz.
Item # AHS
795.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
American Hunting Sword
CLICK ON EACH PICTURE TO ENLARGE
Captains Cutlass
All parts are cast of brass and the handle is also brass covered with black leather with a wire wrapping. This is a double threaded tang sword making it suitable for battle with an un-sharpened edge. This straight bladed cutlass is a little heavier than I normally make weighing in at 2 pounds 11 oz and it is balanced 3" forward of the guard. Based on patterns of our history but made to only resemble ones from our history. The sword has a blade length of 25" and overall it is 30" 1/4 inches.
ITEM # CC
695.00
Captains Cutlass
SOLD
CLICK ON EACH PICTURE TO ENLARGE
Hearts Desire Cutlass
Our Hearts desire dagger has been so popular we decided to go ahead with the plans to make it as a cutlass also. This fine sword is light and agile coming in at just over 2 pounds while its sitting in its scabbard. All parts are cast of Brass with a Black Cherry pearl handle. This is a full tanged sword that is double threaded at the end of the tang and boasts a high carbon steel 26" blade with weight reducing fullers. The overall length of this sword is 31" and will make a head turning showpiece that is fit for battle.
Item # HDC
695.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Hearts Desire Cutlass
CLICK ON EACH PICTURE TO ENLARGE
Hearts Desire
I had to come up with a custom heart design for another project and saw the design of this dagger in my mind as I have been finishing the other for a customer. Here we have the Hearts Desire with the guard, knuckle bow and diamond shaped pommel cast of brass. We can also cast this in White Bronze at an additional cost. The handle needed to complement the rest of this fine dagger so I finished that with poly black cherry acrylic. The blade is carbon steel left un-sharpened but is fairly sharp at the tip. The blade measures 14" and it has an overall length of 19". The scabbard will be wooden covered with black leather and a button holder for a belt or frog. It is balanced about 1'4 forward of the guard and weighs 1 pound 6 oz.
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Item # HDD Brass
495.00
Item # HDD White Bronze
525.00
CLICK ON EACH PICTURE TO ENLARGE
Blackbeard's Sword - Hunting Sword Battle Ready
Ever since the original sword was found at the sight of The Queen Annes Revenge believed to be Blackbeard's sword we have looked to copy it and here we have what most will see as a very close copy to the original. This fine sword has all the gilded dressings of the original and we spared no detail in the making of this fully battle ready sword. The brass fittings are highly detailed with scroll work and the Fleur de Lis markings of the original showing its French origin. The blade on this fine piece is fullered for strength and is 26" with an overall length of 33", a full tanged sword that is threaded under the pommel cap for battle engagement. The Elk antler grip will fit the largest of hands with plenty of room for large knuckles under the brass chain knuckle bow. Fitting for any Pirate persona but perfect for our Blackbeard fans. Museum quality, comes complete with black scabbard. Keep in mind if ordering this sword that no two handles will be identical being that natural antler is used to create the handle.
Item # BBSC
975.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Click Each Picture to Enlarge
The Mermaids Sting
Made with the finest of Musketeer blades this sword is Fierce! I chose the Musketeer blade as it resembles a Marlinspike that a Mermaid would use as a sword. The Musketeer blade is a 3 sided blade and has incredible strength and speed. This sword only weighs 1 pound 10 oz and is perfectly balanced at the very beginning of the hilt. The grip is poly pearl and sparkles in the sunlight, it is double threaded at the hilt. It has an overall length of 35" 1/2 with a 30 blade and will come complete with a wooden scabbard covered in black leather. This sword is of the very finest of quality and is certainly considered battle ready. Made to fit most hands but the grip is small compared to most of my swords
Item # TMS
975.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
CLICK ON EACH PICTURE TO ENLARGE
Patience Short Sword Rapier
God grant me the serenity to accept the things I cannot change, the courage to change the things I can, and wisdom to know the difference.
To adopt the practice of nature, her secret is patience.
Long have I planned on making a new pattern Rapier that was different from others and I believe I have found her in Patience. This fine battle ready Rapier has a 28" 1/2 blade of spring steel with good flex that snaps right back into place. It is 33" 1/2 overall.
I cast the knuckle bow, guard and pommel of brass and fitted it with a hardwood handle covered with leather and twisted brass wire for better grip. This full tanged sword is double threaded with a nut up against the handle and then finished off with a threaded pommel. She weighs 2.4 pounds overall and is perfectly balanced.
Item# RP
695.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Click each picture to enlarge
Shell Guard Cutlass
This forward sweeping shell guard cutlass has a 24" 1/2 blade and is 30" overall. This sword is light and agile for a cutlass and made for stage combat fighting. This is a lightweight sword made for light combat with a fully threaded tang. Leather covered grip with wire wrap. This sword is double threaded, one nut is up against the handle and the pommel is threaded also.
Item # SHC
595.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
CLICK ON EACH PICTURE TO ENLARGE
Presentation Damascus Cutting Knife
Full tang Damascus steel presentation cutting knife. This fine knife has a 5" 1/2 blade and is 11" overall. Brass accents with blade brass wire wrapping the handle. Damascus steel is forged right here in our workshop of 1095 steel and 15N20. Made with a sharpened edge that is an absolute eye catcher. Complete with black belt sheet and snap closure over the handle.
Item# PDCK
SOLD
CLICK ON EACH PICTURE TO ENLARGE
Damascus Cutlass
Damascus Cutlass, sharpened. This is one very fine sword that carries a 22" blade and is 28" overall. Brass fittings and double threaded blade, one at the end of the handle and the pommel itself is threaded. Complete with scabbard shown in the picture
Item # DC
995.00
CLICK ON EACH PICTURE TO ENLARGE
Matched set Rapier and Dagger
Battle Ready
This matched set of Rapier and Dagger can be broken up and sold into separate pices as listed below. Both are Battle ready and comple complete with black scabbard with brass tips and throats. The Rapier has a spring steel blade fit for battle and is double threaded at the tang with a nut under the pommel as well as the threaded pommel. Be sure to check out the last picture showing the flex of the blade with around 35 pounds pressure applied to it. The blade length on the Rapier is 30" and it is 36" 1/2 overall. Point of balance is about 1" forward of the guard.
The dagger is also made of high quality carbon steel and also made for battle. Both Rapier and matching dagger have a brass hilt, handle as well as pommel. Each handle is wrapped with braided wire for an extra strong grip. The dagger blade measures 13" 1/2 and is 19" 1/2 overall.
ITEM # MS
Sold
Matched set price
975.00
Click on each picture to enlarge
Dragons Breath Rapier
This is a new pattern sword we are taking custom orders for. We hand cast this guard ourselves and you will not see this as a battle ready weapon from any other maker. This is one fine ornamental sword that is also made for battle. The blade on this fine Rapier is 30" and it has a overall length of 36" The guard with knuckle bow is cast of brass with a brass core handle covered with leather and wire wrap. The tang is double threaded for extra strength. We can use your choice of leather color in Black, Red, navy Blue or Forest Green. We can also make the blade longer at an additional cost. Sword does come complete with scabbard
Item # DBR
995.00
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Gunners Stiletto ( Battle Ready )
As seen in The Encyclopedia of European historical Weapons by Hamlyn page 118 is the Italian Gunners Stiletto circa mid to late 16th - mid 17th century. This was a gunners tool and weapon. Historians have not pinpointed the date of this tool - weapon though there is historical reference without mention of the location of the original. These types of gunners Stiletto's were made with both triangular as well as square shaped blades, sharpened at the tip. This model is the square blade shape. Artillerymen used this specialized dagger for measuring the bore of a gun and size of shot. Typical models such as ours came with caliber measurements from 0 to 120. This model has a blade length of 16" 1/8 and an overall length of 21" 1/2
Item # GS
650.00
Click on each picture to enlarge
George Washington's Battle Sword
(Battle Ready)
Our most detailed work and also some of our most expensive work. Perfect for any George Washington reenactor or for the collector of fine pieces of our history. George Washington wore his battle sword while serving as commander of the Continental Army during the Revolutionary War. The original sword was made in Fishkill, New York by John Bailey, a cutler from Sheffield, England. Our reproduction of this elaborate sword has a slightly curved, grooved steel blade as the original, hand forged with hand cast white bronze cross guard, bolster and threaded nut. Silver plated ferrule. All the work on this fine sword we did by hand and it is as close to the original as we could muster. The grip is a green dyed bone, hand carved with sterling silver band.
Due to the nature of this sword taking several weeks to complete please keep that in consideration when ordering. Our work schedule normally has us booked out months in advance.
THIS IS A SPECIAL ORDER ITEM ONLY, WE MAKE THESE PER ORDER. CALL OR EMAIL US FOR WAIT TIME BEFORE YOU WILL RECEIVE YOUR ORDER
Item #GWBS
2000.00
Click Each Picture To Enlarge