KINGS FORGE AND MUZZLELOADING

kingsforge@gmail.com

706 969 3027

Battle Ready Swords and Stage Combat Swords

 

The following pictures and works of our swords are completely hand forged and most are battle ready, read description for type of sword. Please be advised that swords even with a dull edge are capable of inflicting major damage and injury if used improperly. We recommend that if you intend on using your sword for battle that you take a course from a professional swordsmen to protect yourself and others that you engage swordplay with. Most of our swords are made for use but we hold no responsibility for misuse. Many of our Pirate mates love our swords as they are light to carry and fast in battle. Please read each listing and fit yourself to a sword. If we do not have what you are looking for in stock feel free to call us or send us a message. Most of our swords are made for battle but we do also make hip hangers that are strictly for show and display. Hip Hagers and display swords are just that, for display "not for battle" and they will be listed as such.  

                

 


 

Matched set Rapier and Dagger

Battle Ready

This matched set of Rapier and Dagger can be broken up and sold into separate pices as listed below. Both are Battle ready and comple complete with black scabbard with brass tips and throats. The Rapier has a spring steel blade fit for battle and is double threaded at the tang with a nut under the pommel as well as the threaded pommel. Be sure to check out the last picture showing the flex of the blade with around 35 pounds pressure applied to it. The blade length on the Rapier is 30" and it is 36" 1/2 overall. Point of balance is about 1" forward of the guard.

The dagger is also made of high quality carbon steel and also made for battle. Both Rapier and matching dagger have a brass hilt, handle as well as pommel. Each handle is wrapped with braided wire for an extra strong grip. The dagger blade measures 13" 1/2 and is 19" 1/2 overall.

Matched set price 

975.00 

Rapier only 

650.00

Dagger only 

325.00

Click on each picture to enlarge

    


Item # VSGC

SOLD

Click on each picture to enlarge


Gunners Stiletto ( Battle Ready )

As seen in The Encyclopedia of European historical Weapons by Hamlyn page 118 is the Italian Gunners Stiletto circa mid to late 16th - mid 17th century. This was a gunners tool and weapon. Historians have not pinpointed the date of this tool - weapon though there is historical reference without mention of the location of the original. These types of gunners Stilletto's were made with both trianglar as well as square shaped blades, sharpened at the tip. This model is the square blade shape. Artillerymen used this specialized dagger for measuring the bore of a gun and size of shot. Typical models such as ours came with caliber measurements from 0 to 120. This model has a blade length of 16" 1/8 and an overall length of 21" 1/2

Item # GS

650.00

Click on each picture to enlarge


Economy Jack Sparrow Sword

(Stage Combat but we can upgrade any model to Battle Ready)

Well mates many of you have asked me to produce a Jack Sparrow sword thats ready for battle and here we have our first. This economy model Sparrow Sword comes with a non fullered blade and we can and will also make them with a fullered blade at an extra cost of 100.00 that will also be battle ready. Just testing the waters with this first one to see how ye mates like it. It more closely resembles the actual sword carried by Johnny Depp than any of the replicas we have seen out there that are not made for battle. This sword will come with a scabbard thats well under way to being finished. The sword blade is just over 24" and has an overall length of 30", the whole sword weighs in at 1 pound 12 oz. A sword does not have to be heavy to be made for stage combat mates, it just has to be forged properly.

Item # EJSS

450.00 

Click Each Picture to Enlarge

    


Damascus Dagger

( Battle Ready )

Now this is one fine left or right handed dagger and the only I have made just like this. the blade is a damascus tear drop pattern, 8" 3/4 long with an overall length of 14" 1/4. The guard, grip and pommel are brass, complete with belt sheath for a 2" belt.

Item # DD

SOLD

Click Each Picture to Enlarge

    


Horn Handled Dagger and Leg Bone Dagger

Here we have two different daggers listed in the same pictures but being sold separately. The first is a Horn hanlded dagger, sharp at the tip with a 6" blade and measuring just over 10" in length. Both come with a boot sheath that could be worn in a boot or under a belt. The second dagger also carrys a 6" blade but the leg bone handle is a bit longer coming out to be just over 11" in length. Both blades are hand forged and finished

Horn Handled Dagger 

SOLD

Leg Bone Handle Dagger

SOLD

Click Each Picture to Enlarge

  


 Cryptic Hand Dagger

This fine dagger we made up for fun but do take heed that the blade is real and sharp at the tip. Carbon steel sharp tipped blade and guard is also forged of carbon steel. If your looking for something different that the rest then this may be just what you are looking for. The blade length is 6" and has an overall length of 11"1/2

Item # CHD

SOLD

Click Each Picture to Enlarge

    


Heart Guard Cutlass

(Stage Combat but we can upgrade any model to Battle Ready)

Here we have one fine blade recently finished and ready to ship. This is a full tanged sword that is double threaded at the back of the handle as well as at the tang. Blade is unsharpened. The heart shaped guard is known to be quite popular in our history and with the combo of the wire wrapped handle and ball pommel this makes for a very elegent sword. The blade is 24" and has an overall length of just over 30". It weighs in at just 2 pounds 11oz so its one of the lighter cutlass we produce and is easy on the shoulder fitted in a baldric, complete with scabbard

Item # HGC

SOLD

499.00

Click Each Picture to Enlarge

       


The Pirates Needle

Here we have another Pirates Needle and this time with a different guard than the last. These thin blades I make are sharp mates so if ye be wanting a sword to cut your bread this may be it. The blade itself is 20" 5/8 and it has an overall length of 25" 7/8. It comes in at a weight of 9.9 oz itself and in the scabbard it is still under 1 pound. The handle is geunine Deer legbone for those going for a very authentic look

Item # TPN

SOLD 

Click Each Picture to Enlarge

  


Miss Behaven

( Stage Combat ) 

Here we have a new offering for ye all to take a gander at in this fine stage combat cutlass. It carries a 21" 3/4 blade with a weight reduction fuller and is 27" 1/4 overall. This sword will serve a new owner well and weighs in at 1 pound 7.7 oz so it will be light at your side. The heart shaped guard is a common mid 18th century pattern made of brass. The handle is double threaded and made of Curly Maple dyed Red and finished with finger holds for a good firm grip. For a cutlass this blade is really elegant looking and will be sure to catch many eyes. Complete with scabbard

Item # MBS

SOLD 469.00

Click Each Picture to Enlarge

  


Barbossa's Son

Here we managed to get one of the Barbossa guards in brass and let me tell you this is one very fine sword! This was a Wilkenson guard in the day and I believe it was made for the French Navy. The blade on this fine sword is battle ready and double threaded at the tang, wrapped with Navy Blue leather and twist wire wrapped. The length of the blade is 21"3/4 and it is 28" overall  and it does complete with a scabbard, all eyes will turn when you walk by with this fine blade

Item # BSS

SOLD 569.00

Click Each Picture to Enlarge

  


British Naval Cutlass

Here we have a really fine Naval style cutlass with a 30" blade and is 36" overall. Made as a battle sword that is double threaded at the tang. The grip is black leather wrapped and one we made for a movie production that never went through sadly, their loss is your gain. The guard is a standard rivited brass cup guard that offers a great amount of porotection for your hand and has a British marked crest to enhance its looks and beauty. Complete with black leather scabbard

Item # BBHS

SOLD 569.00

Click Each Picture to Enlarge

  


17th Century Pillow Sword

This type of sword was one of the sword types in the transition from long bladed Rapiers to the shorter and lighter small swords during the first half of the 17th century. This type of styling is referred to today as Pillow Sword. The name comes from the belief that swords such as this were hung by the bed for defense against night attacks. The guard is a double serpent pattern and made of a solid brass casting with a leather and wire wrapped handle. The tang is double threaded, one nut at the top of the handle and the threaded pommel. Heres a good inside view of the grip that will fit any size hand from small to large. The grip itself is 4" but leading onto the lower end of the pommel it can fit up to a 4" 3/4 wide hand. Marked with our forge mark this blade is a very fine blade for battle

Item# CPS

SOLD 569.00

Click Each Picture to Enlarge

  


The Musketeer

 The basket is an all steel construction fitted with a Curly Maple handle, double threaded for strength and finish off with a german silver pommel cap. Get a good look at the blade design as it is a true spearpoint also referred to by many as a Musketeer style blade. This sword is made as a right or left handed model and is perfectly balanced at the hilt. The blade is of a spear point design and is a symmetrically-shaped blade with a point aligned with the centerline of the blade's long axis. True spear-point blades are double-edged with a central spine, like a dagger or spear head. The spear point is one of the stronger blade point designs in terms of penetration stress. 
The length of the blade of this sword is 30" and has an overall length of 38" and weighs in at only 1 pound 14.5 oz

Item # TMS

649.00

SOLD

Click each Picture to Enlarge

     


The Skull

(Hip Hanger, Display)

This new sword design has our mates wanting more so we are now offering these as out to order. Sword typically comes with a 22" blade with weight reduction fuller and is 29" long overall. The hand cut skull guard is made in a right or left handed model. fitted with a Elk leg bone similar to a human femur bone. Complete with black or brown scabbard. Call us or email for us to get one started for you.

Item # TSS

449.00

Click each Picture to Enlarge

     


Short Sword with Embossed Guard

Right or Left handed

( Battle Ready )

This is one fine Short sword we just finished in our workshop that is sure to please with an embossed guard. The guard is embossed and baroque d to bring out all the detail work. The blade on this fine weapon is 23" and it is 31" overall. Leather wrapped handle with navy blue ribbon and german silver wire wrap. A battle ready weapon complete with a scabbard included.

ITEM # EGC

SOLD

CLICK EACH PICTURE TO ENLARGE

     


Filigree Parrying Dagger

​( Battle Ready )

Our very finest work in parrying daggers is what you have before you. This sail guard filigree dagger is sure to attract much attention whether worn on your hip or drawn in battle. The carbon steel blade on this fine dagger is 12" 1/4 long and has an overall length of 17"3/4. The handle is carved antler dyed Wine Red and wrapped in German Silver wire and is double threaded. This very fine dagger will be the envy of all your friends

Item # FPD

SOLD

    


 Small Sword Rapier

(Battle Ready)

This fine sword is freshly finished and ready for battle with a carbon spring steel blade of 27" and overall length of 31" 1/4 weighing under 2 pounds. This sword is period correct for the golden age of Piracy forward and is perfect for aboard ship or at the Ball. The handle is leather wrapped and brass wire wrapped. Marked with our forge mark as all of our blades. Complete with wooden scabbard wrapped in leather

Item # SSRB

SOLD 

Click Each Picture To Enlarge

    


 Small Sword Rapier 

(Battle Ready)

This fine sword is freshly finished and ready for battle with a carbon spring steel blade of 27" and overall length of 31" 1/4 weighing under 2 pounds. This sword is period correct for the golden age of Piracy forward and is perfect for aboard ship or at the Ball. The handle is leather wrapped and German Silver wire wrapped. Marked with our forge mark as all of our blades. Complete with wooden scabbard wrapped in leather

Item # SSRR

SOLD 

Click Each Picture To Enlarge

    


 Original German Hunting Sword - Falchion

 Circa 1750

This is an original relic antique hunting sword that came to us. We are now offering it for public sale. Typically swords of this age are missing parts or with broken or lost handles but this one is complete and very solid. Showing signs of battle on the blade and the original file marks of the maker which is unknown. The deer leg shaped guard, forward sweeping shell and pommel are made of iron like many examples of the period were made. The original scabbard is missing but we will supply one with the blade in either black of dark brown leather covering as shown. The blade is 17" in length and the sword is 22" 3/8 overall. You can own this very rare piece of history today

ITEM# OGHF

 600.00

Click Each Picture To Enlarge

          


Linstock Head

Circa 14th Century

 Fuse holder Linstock Head, we provide the head and you provide the shaft

 Item# LH

 99.00

Click Picture to Enlarge


Whydah Pike Head
 
We copied this pattern from the drawings of one found on the Whydah Gally, Captain Black Sam Bellamy's ship until she sank on April 26th 1717 when the ship ran aground and capsized near Cape Cod. A drawing can be seen in the book Expedition Whydah by Barry Clifford. Our example is made of carbon steel with a head measuring just over 4" and an overall length with langet's 10" of as the original found at the sight of the Whydah
 
ITEM # WPH
149.00
Click Each Picture To Enlarge
  

Blackbeard's Sword - Cuttoe ( Stage Combat )

Ever since the original sword was found at the sight of The Queen Annes Revenge believed to be Blackbeard's sword we have looked to copy it and here we have what most will see as a very close copy to the original. This fine sword has all the gilded dressings of the original and we spared no detail in the making of this fully battle ready sword. The brass fittings are highly detailed with scroll work and the Fleur de Lis markings of the original showing its French origin. The blade on this fine piece is fullered for strength and is 21" 3/4 long with an overall length of 27" 1/4, a full tanged sword that is threaded under the pommel cap for full battle engagement. The Elk antler grip will fit the largest of hands with plenty of room for large knuckles under the brass chain knuckle bow. Fitting for any Pirate persona but perfect for our Blackbeard fans. This sword comes complete with leather wrapped steel scabbard.

Item # BBSC

SOLD 

Click Each Picture to Enlarge

          


American Hunting Sword - Cuttoe (Stage Combat)

Circa 1750 This battle ready sword would be a perfect addition to your Pirate or 18th or 19th Century impression, military or civilian. This full tang sword boasts a modest 21"7/8 carbon steel blade and is 27" overall with a fuller running 3/4 of the length of the blade. This blade has excellent flex and will serve you well in stage and show as well as in full battle. Brass fittings and leather grip wrapped with brass wire adorn the grip on this fine replica made right here in our workshop. Marked with our forge mark as all of our weaponry. Complete with scabbard this sword comes to you with unsharpened edge but can be sharpened for an additional fee

Item# AHS-C

SOLD 

Click Each Picture to Enlarge

    


Custom Cutlass

​( Battle Ready )

This cutlass was inspired by the artwork of famous Russian Anri of Anne Bonny. This battle ready cutlass is one formidable weapon with a 26" 1/2 full tang carbon steel blade and steel fittings all forged right here in our workshop. The handle is leather covered wood with steel tacks. The sword measures 34" overall and will be the envy of all Pirates complete with steel fittings scabbard.

Item# CC

SOLD

Click Each Picture to Enlarge

    


Dutch Double Shell Guard Left Handed Cutlass

( Battle Ready )

This Dutch Double Shell Guard Cutlass was made for the seas and is a fully battle ready sword. A popular pattern originally made by the Dutch grew in popularity quickly with other nations. This sword has a excellent balance and is very light and nimble made for the left handed Pirate. With a blade length of 24"and overall length of 30" with plenty of room even for the largest of hands. The double shell guard is forged from 11 gauge steel and has a thumb ring to keep it in total control in your hand. As all of our swords this one is forged and finished from carbon steel, this is a fine battle ready sword that will be the envy of yer mates

SOLD Item # DDSG

759.00

        


 Custom Octopus Bone Handle Dagger

​( Battle Ready )

This dagger is certainly one of a kind with an carved Octopus carved out of the antler gripping the handle. The finest detail is shown is this work of functional art. The carbon steel blade is razor sharp and is 14" 3/4 long with an overall length of 19" 3/4. This is a one time offering as we carved this antler by hand in our workshop and hand forged the blade and fittings. Perfect for the discriminating Pirate that likes a truly unique piece, complete with leather bound scabbard.

Octopus Dagger

Item # OD

SOLD 

Click Each Picture To Enlarge

          


 Dussack Sword

( Battle Ready )

EXPLAINED IN SAXON ARCHIVES OF EARLY 16TH CENTURY DESCRIBE THIS WEAPON AS DER BEHEMISCHE DUSSACK. HISTORY SHOWS THIS FALCHION AS A VERY SIMPLE WEAPON MADE OF A SINGLE PIECE OF IRON. OUR MODEL IS MADE OF 1/4 SPRING STEEL MEASURING 24"1/2 LONG WITH A 19" BLADE EDGE MARKED WITH OUR FORGE MARK. SHOWN IN LAST PICTURE IS THE COMPANION DAGGER THAT CAN BE PURCHASED WITH THE FULL SIZE DUSSACK OR WITHOUT.

DUSSACK SWORD 

ITEM # DS

175.00

Click Each Picture To Enlarge

    


George Washington's Battle Sword

(Battle Ready) 

 Our most detailed work and also some of our most expensive work. Perfect for any George Washington reenactor or for the collector of fine pieces of our history. George Washington wore his battle sword while serving as commander of the Continental Army during the Revolutionary War. The original sword was made in Fishkill, New York by John Bailey, a cutler from Sheffield, England. Our reproduction of this elaborate sword has a slightly curved, grooved steel blade as the original, hand forged with Nickel silver mounted cross guard, Silver plated ferrule. All the work on this fine sword we did by hand and it is as close to the original as we could muster. The grip is a green dyed bone, hand carved with nickel silver band. 

SOLD

Click Each Picture To Enlarge

        


Hunting Sword/Cutlass

( Stage Combat )

The sword will strike fear into the weak hearted with 24" blade and Elk leg bone handle. The Stirrup guard has a simple curl at the end of the knuckle bow. This sword will be the envy of any crew. Measures 30" overall and has a pinned tang with Carbon Steel blade, overall weight of 1 pound 15.8oz ready for battle and complete with leather scabbard.

SOLD

Click Each Picture to Enlarge

         


Skull Grip Cutlass 

( Stage Combat )

One of our recent works of functional art. This Antler grip was painstakingly hand carved by hand for the fine cutlass and matched to a brass guard and 26" hand forged carbon steel blade and marked with out forge mark, a one of a kind piece

Click Each Picture To Enlarge

    


Newly's Knife

Newly's knife is a 7" clip point, hand forged from carbon steel and marked with our torch mark. The full tang is fitted and pinned to a genuine Elk leg bone. Made only under special order 

Click Each Picture To Enlarge

  


 Captain Simpsons Sword

THE SAIL GUARD RAPIER HAS A LONG HISTORY AND DATES FROM THE 16TH TO 18TH CENTURY. THIS FINE EXAMPLE WE FORGED FROM TOOL GRADE CARBON STEEL AND HAS INCREDIBLE FLEX AND BALANCE. THE SWORD IS 34" OVERALL WITH A 26" 1/2 BLADE MARKED WITH OUR FORGE MARK AND HAS LOTS OF ROOM WITH A 5" ANTLER GRIP. A VERY LIGHT AND QUICK WEAPON COMING IN AT 1.54 POUNDS AND WILL BE A FINE ADDITION TO YOUR COLLECTION. COMPLETE WITH BLACK LEATHER SCABBARD. Made only under special order

Click Each Picture To Enlarge

            


Captain Pikes Sword

Lead Role Captain Pike carries this matched pair of mid 18th Century Cutlass in the movie productionThe Sovereign of the Seas: The Four Keys. This matched set of are of hand forged carbon steel, the full sword boasts a double fuller blade with Elk grip and steel fittings in a classic mid 18th Century forward swept shell pattern. The matching short swords blade carries only a single fuller with all matching parts. Made only under special order


Double Maple Leaf Guard Cutlass

This sword we custom made for The Dutchess of Kings Of The Coast . It is a double Maple Leaf guard Cutlass with a 24 1/2 blade and is 30" overall. The grip is Curly Maple with finger grips and hand cut steel pommel. It is a full tang sword made for battle. This sword is very well balanced and we can make one for you to your specifications. 

SOLD

Click Each Picture To Enlarge

    


 OUR NEW ENGLISH CUTLASS/SABRE

CIRCA 1700 -1800

This is our new English Cutlass/Sabre as seen in George C Neumans  "Swords & Blades of the American Revolution. It is forged right here in our shop and has a battle ready Carbon Steel blade that is 26" long stamped with our makers mark and has a blood groove running almost the full length of the blade. The sword had a steel guard with an Elk handle and is 31" 1/4 overall. This blade is perfect for any persona from 1700 forward. No scabbard included

SOLD

Click Each Picture To Enlarge 

   


 

 

Copyright © 2010 - 2017 Kings Forge and Muzzleloading 

KINGS FORGE AND MUZZLELOADING

kingsforge@gmail.com

706 969 3027
156 Rattlesnake Hill, Cleveland GA 30528




© TTWS